Where flat roofs show up in Tampa Bay
Commercial buildings are the obvious place: strip retail, offices, warehouses and restaurants. But plenty of homes have a low-slope section too. Lanai and porch roofs, additions, carports and the flat section behind a parapet on a mid-century home all need a low-slope system, and they are where many residential leaks start because a shingle roof was run onto a slope that is too flat for it.
TPO vs modified bitumen
| TPO | Modified bitumen | |
|---|---|---|
| What it is | Single-ply thermoplastic membrane, seams heat-welded | Asphalt-based roll roofing, applied in layers |
| Common use | Commercial buildings, larger flat roofs | Residential flat sections, porches, additions |
| Surface | Usually white and reflective | Granulated cap sheet in several colors |
| Heat | Reflects sun, lower rooftop temperatures | Absorbs more heat unless a reflective cap is used |
| Repairs | Seams and punctures heat-welded by a trained crew | Patched with compatible materials |
What goes into a flat roof replacement
- Tear-off or recover. Code limits how many roof layers a building can carry. We tell you whether the old roof comes off or a recover is allowed.
- Deck and insulation. Wet insulation is replaced, and tapered insulation can be added to move water toward the drains.
- Membrane and seams. On TPO, every seam is heat-welded and probed. On modified bitumen, layers are adhered or torch-applied depending on the product.
- Flashings, curbs and drains. Most flat-roof leaks start at a wall, a curb or a drain, so these details get the most attention.
- Edge metal. Perimeter metal is where wind gets in. It is installed to the Florida Building Code and the product approval for the system.
Commercial roofing for owners and property managers
We work with building owners, property managers and general contractors on replacements, repairs and maintenance. You get a written scope and price, a schedule that works around your tenants and a crew that keeps the site clean. For larger projects we coordinate with your rooftop HVAC and electrical trades so curbs and penetrations are flashed correctly.
Repairs and maintenance
Flat roofs do not always announce a problem the way a pitched roof does. Water can travel a long way under a membrane before it shows up inside. If you have a stain, a soft spot or a seam that has lifted, we inspect the whole roof, not just the spot, and give you a written price for the repair, usually within 24 hours.
Pricing
Flat roof prices depend on the system, the size, how many layers come off, the condition of the deck and insulation, and the number of penetrations and curbs. Every roof is priced after we look at it, and you get a written estimate, usually within 24 hours. Financing is available on residential projects.
Common questions
What counts as a flat roof?
Any roof with a low slope, generally 2:12 or less. True flat roofs still drain, but water moves slowly, so the membrane and the drainage details matter more than on a steep roof.
TPO or modified bitumen: which is better?
Both work in Florida when installed correctly. TPO is a single-ply membrane with heat-welded seams, usually white and reflective, and it is the common choice on commercial buildings. Modified bitumen is an asphalt-based roll roofing applied in layers, often on smaller residential flat sections. We recommend one based on the building, the slope and what the roof connects to.
My flat roof ponds water. Is that a problem?
Standing water that lasts more than a day or two shortens the life of any membrane. Sometimes the fix is drainage, sometimes it is tapered insulation during a replacement. We look at where the water sits and tell you which.
Do you do commercial roof maintenance?
Yes. Flat roofs benefit from a yearly check of seams, drains, flashings and rooftop equipment curbs. We also handle warranty service on roofs we installed.
What warranty comes with a commercial roof?
Our workmanship warranty on commercial roofs runs 5 to 10 years depending on scope, and covers leaks and defects in our work. The membrane manufacturer covers materials, and some systems qualify for manufacturer programs with no-dollar-limit coverage. Terms are written into your estimate.
